ACOMNIRPSMA
2.4Ghz 5dbi Dipole Antenna with RPSMA connector
ราคายังไม่รวม Vat 7%
Tel :095-5544841, 02-7698200
E-Mail : sales@wireless-guru.com
line : @wireless-guru
Subtotal: 5,260.00 ฿
2.4Ghz 5dBi Dipole antenna with RPSMA connector.
ราคายังไม่รวม Vat 7%
Tel :095-5544841, 02-7698200
E-Mail : sales@wireless-guru.com
line : @wireless-guru
258.00 ฿
CompareACOMNIRPSMA
2.4Ghz 5dbi Dipole Antenna with RPSMA connector
ราคายังไม่รวม Vat 7%
Tel :095-5544841, 02-7698200
E-Mail : sales@wireless-guru.com
line : @wireless-guru
brands | Mikrotik |
---|
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 – 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.
Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.
Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality – up to 150 m).
Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages.
Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.
Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.
S+RJ10 module is supported also on devices with passive cooling, but may require an extra cooling.
The latest revision of S+RJ10 contains “/r2” by the end of serial number. It comes with following improvements:
– Jumbo frames up to 10218 Bytes are now supported for rates 2.5Gbps, 5Gbps and 10Gbps;
– Link speed reporting is fixed – actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly;
– DDM monitoring (Supply Voltage, Module temperature) is now supported.
There are no reviews yet.